How to fix a burnt ElfBar?

If you are experiencing a burnt taste or a harsh throat hit when using your ElfBar, it is likely that the coil has burnt out. A burnt coil can be caused by a variety of factors, such as high wattage, low e-liquid levels, chain vaping, or using a heavily sweetened e-liquid. Fortunately, there are several steps you can take to fix a burnt ElfBar.

Prime the coil

The first step to fixing a burnt ElfBar is to prime the coil. This involves saturating the cotton wick with e-liquid before using the device. To prime, the coil, add a few drops of e-liquid onto the cotton wick and wait for a few minutes to allow it to soak in. This will ensure that the coil is properly saturated and will prevent it from burning out too quickly.

Lower the wattage

If the wattage is too high, it can cause the coil to burn out quickly and result in a burnt taste. To fix this issue, try lowering the wattage. If you are using a device with adjustable wattage, decrease the wattage until you find a setting that produces a smooth and flavorful vapor.

Increase the e-liquid level

If the e-liquid level is too low, it can cause the cotton wick to dry out and burn, resulting in a harsh and burnt taste. To fix this issue, try increasing the e-liquid level. Make sure that the e-liquid is filled up to the maximum fill line and avoid vaping when the e-liquid level is low.

Avoid chain vaping

Chain vaping, which is vaping repeatedly without taking breaks, can cause the coil to burn out quickly and result in a burnt taste. To fix this issue, take breaks between each puff and allow the coil to cool down. This will prevent the coil from overheating and burning out too quickly.

Clean the contacts

Over time, dirt and debris can build up on the contacts between the coil and the battery, causing poor connectivity and resulting in a burnt taste. To fix this issue, clean the contacts using a cotton swab or a soft cloth. Make sure that the contacts are clean and free from dirt and debris.

Replace the coil

If none of the above steps fix the burnt taste, it may be necessary to replace the coil. To do this, unscrew the old coil from the tank and screw in a new one. Make sure that the new coil is properly primed before using it.

In conclusion, fixing a burnt ElfBar is relatively simple and can be done by priming the coil, lowering the wattage, increasing the e-liquid level, avoiding chain vaping, cleaning the contacts, or replacing the coil. By following these steps, you can enjoy a smooth and flavorful vaping experience with your ElfBar.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top